d line QST3190PP3

d line Qtoo Infrared Sensor Wall Mounted Tap, Stainless Steel AISI 316, Polished Brass PVD.

Projection: 190mm - 7 1/2
Rose Ø90mm - 3 1/2" with integrated sensor
Built-in aerator
Max. flow: 5L - 1.3gpm

Sensor features:
Operating detection range sensor: 50mm to 250mm
Comfort time: 2 seconds (+/- 20%)
Safety time out: 30 seconds (+/- 20%)
Flow 5 L/min (others available on request)
Battery lifetime (6 AA): 20 daily activations = 8.4 years, 150 daily activations = 4.6 years
Low battery: 1 blink every 5 seconds (10 days)
Empty battery: 1 blink every 5 seconds (until battery completely empty - and then no water supply)
Cleaning mode 60 sec.
Hygiene flush disabled
Special setting parameters on request: Operating detection range, Safety time out (deactivated or 1-240 sec.), Comfort time (0-100 sec.), Hygiene flush, Frequency (1 h - 72 h), Duration (1 - 240 sec.)

Mandatory accessories:
QSF01 Premix flexbox or QSF02 Single flow flexbox
QS3400 Recessed part with 1/2" connection

Optional accessories:
QSP01 Power supply for flexbox

Product care
d line products are manufactured from the highest quality AISI 316 stainless steel. To maintain the unique d line finish, please follow the instructions below:

Wash surfaces with soapy water or a mild detergent.
Always rinse thoroughly with clean water.
To complete the cleaning procedure, dry/polish the surface with a soft dry cloth.
Do not use scouring powder, steel wool, chlorine-containing cleaning agents or other aggressive cleaning agents, as these can damage the surface.
If stains or corrosion appear on the surface, this is not due to the quality of the stainless steel, but to impurities in the environment, aggressive conditions or incorrect or insufficient cleaning.