D-Line QST3290MP5

d line Qtoo infrared sensor tap for wall mounting, stainless steel AISI 316, satin bronze PVD.

Projection 250mm - 9 27/32''
Rosette Ø90mm - 3 1/2" with integrated sensor
Built-in aerator
Max. flow rate 5L - 1.3gpm

Sensor features:
Detection range: 50mm to 250mm
Comfort time: 2 seconds (+/- 20%)
Time-out protection: 30 seconds (+/- 20%)
Flow rate 5 L/min (others available on request)
Battery life (6 AA): 20 daily activations = 8.4 years, 150 daily activations = 4.6 years
Low battery: flashes once every 5 seconds (10 days)
Empty battery: flashes once every 5 seconds (until the battery is completely empty - and then no water supply)
Cleaning mode 60 sec.
Hygiene flush disabled
Special setting parameters on request: Detection range, Time-out protection (deactivated or 1-240 sec.), Comfort time (0-100 sec.), Hygiene flush, Frequency (1 h - 72 h), Duration (1 - 240 sec.)

Mandatory accessories:
QSF01 Premix flexbox or QSF02 Single flow flexbox
QS3400 Built-in part with 1/2" connection

Optional accessories:
QSP01 Power supply f/ flexbox

Product care
d line products are manufactured from the highest quality AISI 316 stainless steel. Please follow the instructions below to maintain the unique d line finish:

Wash the surfaces with soap and water or a mild detergent.
Always rinse thoroughly with clean water.
To complete the cleaning procedure, dry/polish the surface with a soft dry cloth.
Do not use scouring powder, steel wool, chlorine-based cleaners, or other harsh cleaning agents, as these may damage the surface.
If spots or corrosion appear on the surface, this is not due to the quality of the stainless steel, but to impurities in the environment, aggressive conditions, or incorrect or insufficient cleaning.