DLINE QST3190MP2 built-in sensor wall-mounted faucet 190mm PVD copper

d line Qtoo Infrared sensor tap for wall mounting, stainless steel AISI 316, satin copper PVD.

Projection: 190mm - 7 1/2"
Rose Ø90mm - 3 1/2" with integrated sensor
Built-in aerator
Max. flow: 5L - 1.3gpm

Sensor features:
Operating detection distance sensor: 50mm to 250mm
Comfort time: 2 seconds (+/- 20%)
Time-out security: 30 seconds (+/- 20%)
Flow rate 5 L/min (others available on request)
Battery life (6 AA): 20 daily activations = 8.4 years, 150 daily activations = 4.6 years
Low battery: 1 flash every 5 seconds (10 days)
Flat battery: 1 flash every 5 seconds (until battery is completely flat – and then no water supply)
Cleaning mode 60 sec.
Hygiene flush deactivated
Special setting parameters on request: Operating detection distance, Time-out security (deactivated or 1-240 sec.), Comfort time (0-100 sec.), Hygiene flush, Frequency (1 h - 72 h), Duration (1 - 240 sec.)

Mandatory accessories:
QSF01 Premix flexbox or QSF02 Single flow flexbox
QS3400 Recessed part with 1/2" connection

Optional accessories:
QSP01 Power supply for flexbox

Product care
d line products are manufactured from the highest quality AISI 316 stainless steel. To maintain the unique d line finish, please follow the instructions below:

Wash the surfaces with soapy water or a mild cleaning detergent.
Always rinse thoroughly with clean water.
To complete the cleaning procedure, dry/polish the surface with a soft dry cloth.
Do not use abrasive scouring powders, steel wool, chlorine-based cleaning products or other aggressive cleaning agents, as these may damage the surface.
If any stains or corrosion appear on the surface, this is not due to the quality of the stainless steel, but to impurities in the environment, aggressive conditions or incorrect or insufficient cleaning.